Wet electrostatic precipitator system composition

1. Anode tube group (module)

In the anode control group, the inscribed round Ø 360 hexagonal anode tube is made of flame retardant glass fiber reinforced plastic, with good integrity, high strength, and high concentration and parallelism of anode tubes.

2. Cathode system

The cathode system includes cathode corona wire, integral cathode wire holder and connecting bolts. The cathode frame is 316L.

The cathode wire is an efficient burr electrode wire, and the material is 316L. By increasing the specific current and electric field strength, its high efficiency and corrosion resistance can meet the requirements of new Wet dedusting Requirements for devices. At the same time, taking into account the fixing measures of the entire cathode line, it can better meet the requirements of high working gas velocity.

3. Insulator room and high-voltage cable inlet box

The power supply area of the wet dedusting device is located at the top of the tower body, with an independent insulator box. The insulator box has lead wires, and the negative pole is fixed at the bottom. The insulation box is made of large diameter porcelain bushing and special sealing materials. The top cover and barrel body of the incubator are internally insulated with aluminum silicate fiber, thus ensuring that the incubator is more reliable and energy-saving.

4. Flushing system

The upper part of the anode tube is provided with an intermittent spray device. Clean the anode tube and demister with clean water from the process tank. According to the actual operation, flush for 5 minutes every 24 hours. The flushing water and flushing materials directly enter the circulating pool of the absorption tower.

5. Electric heating system

The dust collector operates under positive pressure to prevent condensation and insulator pollution. An electric heater is installed in the insulation box to make the insulator insulation more reliable. The insulator box is equipped with heating device and automatic temperature control device, which can provide uniform heating and accurate temperature detection, effectively prevent fog from entering the insulator box and prevent moisture condensation. Therefore, there is a certain maintenance space.